Qv-Link Software/Drivers for the QV-10/a digital camera.
Unzip to a temp folder on hard drive, you will now have 2 zip files, each one goes on a 1.44 mb floppy disk.
Before unzipping them to a floppy, format each floppy and give each volume label DISK-1 and DISK-2. Then unzip the first file to the DISK-1 floppy and then the 2nd file to the DISK-2 floppy.
Start setup using first disk, works with both Win 3.1 and Win 9x, (setup will ask you which one you want to install for)
No drivers, they are installed along with the software.
This should work on any digital camera with serial port hookup.
88%
Good
100%
Good
Driver Chat
